A8L V8-4.2L (BFM) (2004)
Power Window Switch: Service and Repair
Rear Door Window Regulator Switch Panel, Removing and Installing
Window Regulator Switch Panel, Removing And Installing
Special tools, testers and auxiliary items required
-
Torque wrench V.A.G 1410
Removing
-
Remove door trim.
-
Remove insulation..
-
Remove armrest.
-
Remove bolts - 5 - (2x).
-
Tightening torque 2 Nm
-
Remove bolt - 4 -.
-
Tightening torque 2 Nm
-
Pull front section - 3 - of armrest - 1 - out of guide - 2 -.
-
Push down cover - 6 - to rear.
-
Disconnect connector on inside of front section - arrow -.
Installing
-
Install window regulator switch module in reverse order of removal.