A8L Quattro Sedan V8-4.2L (AKB) (2002)
-
Only vehicles with anti-theft warning system.
-
Removing and installing, see Fig. 1
12
-
Hinge arm
Fig. 1 Removing and installing microswitch
-
Mount for door handle -1- removed.
-
Carefully release locking tabs (arrows) and remove microswitch -3- upward.
-
Press back locking mechanism (arrow B) and slide harness connector up and out of mount.
-
Pull connecting cable out of seal -2-
-
When installing, be sure to press cable completely into seal as shown.
Fig. 2 Removing and installing seal for door handle