audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Subframe, Removing and Installing|Page 5868 > < Subframe, Removing and Installing|Page 5866
Page 4
background image

^

Remove holder -1-.

^

Pull parking brake cable out of guide - 2- to rear.

^

Remove hex bolt -3-. Remove guide for parking brake cable.

^

Position transmission lifter VAG 1383 A with plate VAG 1359/2 at final drive.

^

Tension strap around final drive.

WARNING!  Before REMOVING subframe bolts, secure vehicle to reduce the risk of tipping over (e.g. load of approximately 100 kg
(220 lbs.) in luggage compartment).
 

^

Remove subframe bolts -arrows-.

^

Carefully lower subframe.

Pay special attention to the information when installing 

Note:  Replace bolts and self-locking nuts as described in instructions in exploded view, Refer to Suspension, Locations.

^

When inserting subframe, make sure tank breather lines -arrows- are neither damaged nor trapped.

Subframe, Removing and Installing|Page 5868 > < Subframe, Removing and Installing|Page 5866