A8L Quattro Sedan V8-4.2L (AKB) (2002)
/Page-2042001.png)
Head Rest: Service and Repair
Headrests With Monitor, Removing and Installing
Headrests With Monitor, Removing And Installing
Removing
NOTE: All cable ties opened or cut during engine removal must be reinstalled at the same locations during installation.
-
Remove front seat.
-
Remove outer trim panel for seat frame.
Seat without folding table (where applicable)
-
Remove backrest panel.
Seat with folding table (where applicable)
-
Remove folding table.
-
Remove hose clamps - 1 - and - 2 -.
-
Remove bolt - 3 - at cable clip.
-
Unclip wire connector from front bracket under seating surface (arrow).
-
Cut cable ties (arrows) and pull free the electrical wire to monitor.
-
Pull electrical wire to monitor through to the rear.
