A8L Quattro Sedan V8-4.2L (AKB) (2002)
/Page-1183006.png)
^
After replacing brake pads and before moving vehicle, always depress brake pedal several times firmly to properly seat brake pads in their
normal operating position.
-
Install the Torx bolts included in the repair kit into the floating frame and secure brake pads.
^
Tightening torque: 25 Nm
-
Remove wheel bolt from wheel hub.
Note:
When installing wheels, be sure rim flange does not rest on brake caliper.
This could push brake pads out of position.
-
Tighten wheels to 120 Nm when installing.
-
Check brake fluid level and top off, if necessary.
