audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

FN-3 Caliper|Page 3713 > < FN-3 Caliper|Page 3711
Page 1
background image

Brake Pad: Service and Repair
Brembo Brake Caliper

Note:  

^

Always install complete repair kit

^

After replacing brake pads and before moving vehicle, depress brake pedal several times firmly to properly seat brake pads in their normal
operating position.

^

When siphoning brake fluid, always use a bleeder bottle that is used exclusively for brake fluid. Brake fluid is poisonous. NEVER siphon brake
fluid with your mouth!

^

Brakes can be checked using any standard brake test stand as long as both drive capstans have a roller speed of not more than 5.5 km/h.

^

Brake calipers on the same axle must always be from the same manufacturer and of the same quality.

^

Brake line tightening torque: 15 Nm.

1. Brake disk

^

Pads on both sides of axle must always be replaced together.

^

Check for sufficient wear limit.

^

Remove brake caliper before removing

2. Brake caliper

^

If repair work is necessary, do not hang by brake hose. Secure on structure using wire

^

No repair work is permitted at the brake caliper except for "replacing brake pads" and "servicing front brake caliper".

3. Brake pads

^

Pads on both sides of axle must always be replaced together.

^

Different on left and right side

^

Removing and installing; Refer to brake pads.

FN-3 Caliper|Page 3713 > < FN-3 Caliper|Page 3711