A8L Quattro Sedan V8-4.2L (AKB) (2002)
/Page-1185003.png)
-
Remove circlips -4
-
Slide out locking pins -2- inward (arrow).
-
Remove tension spring -3-
Note: Before pushing back the piston, siphon some of the brake fluid out of the brake fluid reservoir. Otherwise, especially if reservoir has been
topped off, fluid will overflow and cause damage.
WARNING: Brake fluid is poisonous. Never siphon brake fluid with your mouth!
-
Press piston back into brake caliper housing.
-
To do this, insert piston using a screwdriver as shown and press powerfully inward.
-
Carefully remove inner brake pad
-
Press piston back into brake caliper housing.
-
To do this, insert piston using a screwdriver as shown and press powerfully outward.
-
Carefully remove outer brake pad
