A8L Quattro Sedan V8-4.2L (AKB) (2002)
-
Remove brake pads.
Note:
Press piston back into caliper housing using resetting tool before inserting new brake pads. Before pushing back the piston, siphon some of the brake
fluid out of the brake fluid reservoir. Otherwise, if reservoir has been topped off, fluid will overflow and cause damage.
WARNING!
Brake fluid is poisonous. NEVER siphon brake fluid with your mouth!
Installing
-
Install pistons by turning 3272 reset and unscrew tool toward right.
-
Insert brake pads.
-
Secure brake caliper housing using new self-locking bolts.
-
Tighten brake caliper housing to 35 Nm