A8L Quattro Sedan V8-4.2L (AKB) (2002)
Camshaft: Testing and Inspection
Camshaft Adjustment Control, Checking
Camshaft adjustment control, checking
-
Connect vehicle diagnostic, testing and information system VAS5051 or VAG1551 scan tool and select engine electronics control module by
entering address word "01. When doing this the engine must be idling. Refer to "Scan Tool Testing/Scan Tool Connecting and Initial
Checks/Connecting VAS5051 or VAG1551" See: Powertrain Management/Computers and Control Systems/Testing and Inspection
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -4- to select function "Basic setting" and confirm entry by pressing -Q- button.
Indicated on display
Basic Setting
Input display group number XXX
-
Press buttons -0-, -9- and -4- to select "Display Group 094" and confirm entry with -Q- button.
Indicated on display
Basic Setting 94
->
1
2
3
4
-
Check specified display value for camshaft timing control.
-
Increase engine speed to approx.: 2000 RPM until "CS-ctrl. ON" appears in display field 2