A8L Quattro Sedan V8-4.2L (AKB) (2002)
/Page-2165003.png)
-
Press -Q- button to confirm input.
Indicated on display
Rapid data transfer
Q
10 - Adaptation
-
Press -Q- button to confirm input.
Indicated on display:
Adaptation
Insert channel number XX
-
Enter desired adaptation channel (adaptation table).
-
Press -Q- button to confirm input.
NOTE: After changing an adaptation value or ending an adaptation channel, "Adaptation" function 10 must be performed again before selecting another
adaptation channel.
Odometer display
This function is used to adapt the odometer after the instrument cluster is replaced.
NOTE:
-
Adaptation can only be performed on an instrument cluster with an odometer reading of not more than 62 miles.
-
Adaptation can only be performed once for each instrument cluster.
-
Only higher adaptation values can be entered (more than 62 miles).
-
If an incorrect value is entered and confirmed, it is not possible to change it. If this happens, the instrument cluster must be replaced.
-
In countries where speedometers are calibrated in miles, adaptation can be performed in miles.
-
Observe notes when replacing instrument cluster.
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Press buttons -1- and -1- to select "Login-Procedure" function 11.
Indicated on display:
Rapid data transfer
Q
11 - Login-Procedure
-
Press -Q- button to confirm input.
Indicated on display:
Login-Procedure
Input code number XXXXX
-
Input code number 13861.
Indicated on display:
Login-Procedure
Q
Input code number 13861
-
Press -Q- button to confirm input
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Press buttons -1- and -0-.
