A8L Quattro Sedan V8-4.2L (AKB) (2002)
/Page-336001.png)
Fluid - A/T: Service and Repair
ATF, Checking Level and Changing
ATF, Checking Level and Changing
^
The ATF level -3- is correct if, at an ATF temperature of 30 - 45°C (86 - 113°F) 1), there is still a slight escape of fluid through the filler plug
hole -2- (the oil rises when it is heated).
1) For hot regions: 50°C (122°F)
Test requirements
^
Transmission not in "mechanical backup" mode
^
ATF temperature no higher than 40°C (104°F) at start of testing
^
Selector lever in "P" position
^
Engine running at idle (closed throttle position)
^
A/C and heat off
^
Vehicle standing on level ground
Notes:
^
Only ATF the designation ESSO LT 71141 (color: clear-yellow) can be added.
^
Additives cannot be used.
^
Container available: G052 162 A2 (1 liter)
^
Checking the ATF level when the temperature is too low will lead to overfilling.
^
Checking the ATF level when the temperature is too high will lead to underfilling.
^
Overfilling or under-filling the ATF impairs the function of the transmission.
CAUTION!
-
Part numbers are listed here for reference only. Always check with your parts supplier for the latest information.
-
Always wear safety glasses.
^
Hang filled ATF reservoir VAG 1924 as high as possible on vehicle (e.g. on radiator grille).
