A8L Quattro Sedan V8-4.2L (AKB) (2002)
/Page-306008.png)
-
Replace bolts -1- for camshaft gears and securing plates -2-.
-
Grease threads and head seating surfaces of bolts for camshaft gears.
-
Install bolts far enough so that they can still just be turned and do not cant.
-
Observe the proper seating of the securing plates on the camshafts.
Before installing toothed belt, make sure crankshafts are set to TDC cylinder 5.
^
The large holes -arrows- on securing plates at camshaft gears must align on inside.
^
-3242- must be screwed in.
-
Route toothed belt in the following sequence: Toothed beld gear crankshaft -5-, eccentric pulley -4-, tensioner -6-, toothed belt gear left camshaft -
3-, coolant pump -2-.
-
At last, place toothed belt on toothed gear of right camshaft -1-.
