A8L Quattro Sedan V8-4.2L (AKB) (2002)
/Page-708002.png)
-
Screw in bolt from oil seal extractor 2085/1.
-
Remove seal with seal extractor 2085 and bolt 2085/1
Installing
-
Clean contact and sealing surfaces.
-
Do not apply oil to sealing lip or outer circumference of seal before installing.
-
Install guide sleeve (from tool set 3241) onto camshaft.
-
Press in seal until flush using press sleeve 3241/1 and bolt 3241/3.
-
Install Camshaft Position (CMP) sensor rotor.
-
Install CMP sensor housing.
-
Connect connector for CMP sensor.
