audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Fuel Pressure Check Valve|Testing and Inspection|Page 2461 > < Fuel Injector Volume, Leakage & Spray Pattern, Checking|Page 2457
Page 1
background image

Fuel Pressure Check Valve: Testing and Inspection

WARNING!
Fire hazard. DO NOT smoke or work near heaters or have anything in the area that can ignite fuel!

Test requirements

-

Fuel pressure regulator OK

-

Fuel pump and fuel injectors OK

-

No leaks in fuel lines 

Checking

-

Disconnect fuel supply line at fuel rail.

-

Install pressure gauge VAG1318 with adapter between fuel supply line and fuel rail.

-

Connect remote control VAG1348/3A, refer to "Fuel Pump, Checking" See: Fuel Pump/Testing and Inspection 

-

Press and hold remote control switch for approx. 30 seconds.

-

Close valve on pressure gauge.

-

Observe drop in pressure for 10 minutes.

Maximum pressure drop (after 10 minutes): 0.5 bar (7 psi)

If pressure drop is not OK:

-

Check pressure gauge connectors for leaks.

-

Check fuel lines for leaks.

If there are no leaks:

-

Replace fuel pump and integrated reservoir.

Fuel Pressure Check Valve|Testing and Inspection|Page 2461 > < Fuel Injector Volume, Leakage & Spray Pattern, Checking|Page 2457