A8L Quattro Sedan V8-4.2L (AKB) (2002)
9
-
Tie-wrap
-
Dimension - A -: approx. 15 mm
10 -
B-pillar
11 -
Connector
-
For belt height adjustment
Fig. 1 Loosening belt tensioner > 06.97
-
Remove front seat.
-
For vehicles with coded radio unit/radio navigation system (RNS) note coding; ask if necessary.
-
Disconnect battery Ground (GND) strap with ignition off.
-
Remove sill plate.
-
Open lock bracket - 2 - and disconnect connector - 1 -.
-
Remove screws - 3 -.
Tightening torque: 5 Nm (44 in.lb.)
CAUTION: The ten-cable must be at a length of dimension - A - = 50 mm parallel to seat belt outlet - 7 -.
4
-
Belt tensioner
5
-
Protective cover
6
-
B-pillar