A8L Quattro Sedan V8-4.2L (AKB) (2002)
6
-
Hex bolt
-
55 Nm (41 ft.lb.)
7
-
Three-point seat belt
-
Removing
-
Remove hat shelf.
-
Remove rear seatback.
-
Loosen belt band ends from floor group (platform). Fig. 1.
-
Pry off cover - 1 - and - 2 -.
-
Pull belt through belt guide.
-
Disconnect connector for belt tensioner (- 8 -).
-
Remove hex head bolt - 6 -.
-
Unhook three-point seat belt in opposite direction of arrow.
-
Installing
-
Check belt function for child seat.
-
Three-point seat belt should not be hindered with cable, wires, deadener etc.
-
For vehicle with belt tensioner check belt recognition.
8
-
Connector for belt tensioner
Fig. 1 Mounting point floor group, outer
-
Remove hex head bolts - 1 -.
Tightening torque: 55 Nm (41 ft.lb.)