A8L Quattro Sedan V8-4.2L (AKB) (2002)
/Page-1404001.png)
Power Steering Pressure Control Valve: Service and Repair
Servotronic Assembly Overview
Servotronic, Assembly Overview
1 - Power steering gear with tie rods
2 - Strainer
3 - Sealing ring
^
Always replace
4 - Sealing ring
^
Always replace
5 - Servotronic solenoid valve -N119-
6 - Hex socket head bolt, 3 Nm (27 inch lbs.)
7 - Connector for Servotronic
^
Different versions
^
To facilitate removal and installation of power steering gear on vehicles with Servotronic, Servotronic solenoid valve -N 119has been provided
with an approximately 80 cm long cable. The connector for this cable now has a round plug instead of a square one.
^
Both versions (square plug/round plug) are fully interchangeable in relation to the power steering gear.
^
When replacing the Servotronic steering gear, the Servotronic valve may have to be exchanged to match the connector.
8 - Relay plate E
