A8L Quattro Sedan V8-4.2L (AKB) (2002)
Rear Knuckle: Service and Repair
Wheel Bearing Housing, Removing and Installing
Wheel Bearing Housing, Removing and Installing
Notes:
^
Wheel alignment after carrying out repair, Refer to Alignment, Description and Operation.
^
For vehicles with headlight vertical aim control, observe, Refer to Lighting and Horns.
Special tools and equipment
^
VAG 1383 A and VAG1359/2
^
VAG 1752
Removing
^
Pry hub cap off wheel or remove using extraction tool 3208.
^
Remove collar bolt -arrow-.
WARNING! To reduce the risk of accident, vehicle must be standing on the ground when loosening and tightening collar bolt.
^
Take off wheel.
^
Secure brake disc with a lug bolt.