A8L Quattro Sedan V8-4.2L (AKB) (2002)
/Page-1475001.png)
Subframe: Service and Repair
Subframe, Removing and Installing
Front Sub-Frame, Removing and Installing
Removing
^
Attach engine support.
^
Pry off hub caps from wheels or remove using extraction tool 3208.
^
Loosen collar bolts and unscrew approximately 10 turns.
WARNING! To reduce the risk of accident, vehicle must be standing on the ground when removing and tightening collar bolt.
^
Remove wheels.
^
Remove engine noise insulation panel
^
Remove ribbed nuts -3- and -4-, remove connecting link.
^
Remove -1- guide-link bolts with washers.
^
Unbolt -2- track control link from subframe.
^
Rear of subframe must be lowered before guide-link bolts with washers can be removed.