A8L Quattro Sedan V8-4.2L (AKB) (2002)
Fig. 5 Installation position of lower spring plate
1 - Spring plate
2 - Shock absorber
A - Line through bolt holes in shock absorber
B - Retainers
^
Hole in spring plate -arrow- must be turned through 90° + 2° with respect to line through bolt holes in shock absorber.
^
Retainers face hole.
Fig. 6 Installing coil spring
^
Install spring plate, lower spring support and protective cap.
^
Position compressed coil spring together with spring compressor VAG 1752/1 on lower spring support, making sure that the end of the coil spring
contacts the stop -arrow,