A8L Quattro Sedan V8-4.2L (AKB) (2002)
Hold the drive flange with one hand to prevent it from falling.
^
Pry sealing ring out of bracket using lever VW 681.
Installing
^
Drive new sealing ring in to stop using pressure piece 3384.
^
Install impulse wheel for VSS-G22 (arrow) on drive flange and check installation position.
Notes:
^
The driver on the impulse wheel must engage in the groove of the drive flange.
^
If necessary, apply Vaseline to the contact surface of the impulse wheel in order to keep it in proper position during installation.