A8L Quattro Sedan V8-4.2L (AKB) (2002)
/Page-945001.png)
Seals and Gaskets: Service and Repair
Selector Lever Shaft Sealing Ring, Replacing
The following special tool is necessary for this work:
-
3454- Pressure piece
Removing
^
Remove left transmission support.
^
Remove multi-function TR switch -F125-.
^
Drive spring pin -1- for front transmission selector lever -2- out (in direction of arrow), until selector lever can be pulled off selector lever shaft.
^
Pierce and pry out sealing ring with small screwdriver.
Installing
