A8L Quattro Sedan V8-4.2L (AKB) (2002)
/Page-988004.png)
Tip: Elongated hole -arrow- will no longer be used for locking cable adjustment
Tip:
-
One of four adjusting pieces (part number 4D0713299 B, C, D, or E) with different hole alignments will now be used instead of elongated
hole.
-
To determine the correct adjusting piece, try each one until the best fitting piece is matched
Tip:
-
The ignition key must be removed
-
To find the proper adjusting piece, start with index B from previous picture
-
Insert new bolt (N 090 364 5) through black clamping piece (4D0 713 358) and adjusting piece (4D0713299 B, C, D, or E ) as shown
-
Attach locking cable -2- and secure clamping piece -3 - by tightening bolt -1-
