A8L Quattro Sedan V8-4.2L (AKB) (2002)
Torque Converter: Service and Repair
Overview and Component Notes and Information
Overview
CAUTION:
Before installing the transmission, check the installation depth dimension of the torque converter.
Component Notes and Information
NOTE:
^
During removal and installation procedures, refer to the component location illustration above and component notes below.
^
Pay attention to the rules for cleanliness when performing work on the automatic transmission. See: Service and Repair
^
Refer to General Repair Instructions. See: Service and Repair
^
Coat sealing rings with Vaseline. Other types of lubricant lead to malfunctions in the hydraulic transmission control.
1
Torque converter
-
Must be secured to prevent it from falling out when transmission is removed
-
Code letters. See: Application and ID
-
Inspecting. See: Testing and Inspection
2
Snap ring
-
In front of sealing ring
-
Replace if damaged
3
Sealing ring
-
Replacing refer to Replacement. See: Seals and Gaskets/Service and Repair/Torque Converter Sealing Ring, Replacing
4
Wavy washer
-
Location: behind sealing ring
-
Replace if damaged