audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Torque Convertor to Flex Plate Torque|Page 3129 > < Torque Convertor to Flex Plate Torque

A8L Quattro Sedan V8-4.2L (AKB) (2002)

Page 1
background image

Torque Converter: Specifications
Installation Dimensions

Installation Dimension Specifications 

If the torque converter is correctly inserted, the distance between the contact surface at the threaded holes on the converter and the contact surface of the
torque converter housing is approximately 22 mm (0.87 inch). 

If the torque converter is not fully inserted, this distance is approximately 10 mm (0.39 inch). 

Torque Convertor to Flex Plate Torque|Page 3129 > < Torque Convertor to Flex Plate Torque