A8L Quattro Sedan V8-4.2L (AKB) (2002)
/Page-1069002.png)
^
Mark before removing
5 - Bolts, Tighten to 55 Nm (41 ft. lbs.)
^
Self locking
^
Always replace
6 - Universal joint
^
maximum bending angle 15°
7 - Adjustment
8 - Bolt, Tighten to 23 Nm (17ft. lbs.)
9 - Drive shaft center mount
10 - Drive shaft
11 - Bolts, Tighten to 55 Nm (41 ft. lbs.)
^
Self locking
^
Always replace
12 - Base plate
^
Mark before removing
13 - Universal joint
^
maximum bending angle 8°
14 - Seal
^
Always replace
^
Remove protective foil and attach self adhesive side to flange shaft
15 - Transmission
