A8L Quattro Sedan V8-4.2L (AKB) (2002)
Windshield: Removal and Replacement
Windshield, Removing
Windshield, Removing
Necessary tools and materials.
WARNING: Always wear protective goggles and leather gloves when removing a windshield.
-
Pry lower windshield molding trim out of retaining clips starting at A-pillar and remove.
-
Remove plenum chamber cover => Fig. 1.
-
Remove interior rear-view mirror.
-
Remove A-pillar trim trim.
-
Pierce hole in adhesive sealing material from inside of vehicle using awl at bottom-left of windshield.
-
Thread cutting wire through awl and pull into inside of vehicle.
-
Lay cutting wire underneath and all around inside of windshield.
-
Secure end of cutting wire at bolt for securing windshield wiper frame.
-
Insert VAG1474/8 protective foil between windshield and instrument panel.
-
Remove sun visors on left, center and right.
-
Insert VAG1474/9 protective foil between molded headliner and windshield.