A8L Quattro Sedan V8-4.2L (AUX) (2001)
/Page-1984003.png)
-
Slope down door trim and pry out locking clip - 1 - at Bowden cable - 2 - of door opener.
-
Unhook nipple of Bowden cable with retaining clip - 3 - at door opener.
NOTE: Make sure that the retaining clip of Bowden cable does not get lost.
-
Disconnect all connectors for wiring harness door trim.
-
Remove wiring harness out of door trim.
Installing
Installation is done in reverse sequence, noting the following:
-
Make sure all retaining clips - 2 - lock correctly into support for door installation components.
