A8L Quattro Sedan V8-4.2L (AUX) (2001)
Trim Panel: Service and Repair
Upper B-Pillar Trim, Removing and Installing
Upper B-pillar Trim, Removing And Installing
WARNING: Observe safety precautions when working on side curtain airbags.
NOTE: Removing and installing upper B-pillar trim - 1 - is the same for vehicles with and without side curtain airbag.
1
-
B-pillar trim
-
Removing:
-
Remove safety belt from seat.
-
Remove lower B-pillar trim.
-
Remove Phillips-head screws - 4 -.
-
Pull trim out of guide for side curtain airbag toward bottom.
-
Remove 3-point seat belt - 5 - from B-pillar trim.
WARNING: Always observe installation sequence for B-pillar trim.
-
Installing:
-
Insert tab - 7 - in guide for side curtain airbag from below.
-
Assemble B-pillar trim with manual seat belt height adjustment - 8 - as shown in figure.
NOTE: Do not press button for manual height adjustment during assembly.