A8L Quattro Sedan V8-4.2L (AUX) (2001)
Seat Back: Service and Repair
-
Remove front seat. See: Service and Repair
CAUTION!
-
Note safety measures when working with airbag. See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Procedures
-
For vehicles with side airbag note installation instructions for seat, refer to "Front Seats/Front Seat, Replacing". See: Service and Repair
1
-
Seatback cover
-
Removing:
- Flip seat back and unhook retaining strips -6- and -7-.
- Pull cover -5- in direction of arrow from retaining clips.
- Stable textile adhesive strip -3- as protection.
- Using screwdriver pry out -4- under welting -2- and carefully.
NOTES:
- Only welting -2- can be pryed out.
- Do not move under seatback cover with screwdriver or seat cover will pull out.
- Carefully loosen welting along total length.
- Remove screws -8-.
- Guide cover -5- out of seatback cover.
2
-
Welting for seatback cover
3
-
Textile adhesive band
-
2 parts
-
Bond to protect seatback cover
4
-
Screwdriver
5
-
Cover
-
2 parts
-
Held in seat rail with clips
-
Guided in seatback cover and hooked in
6
-
Restraining band
7
-
Restraining band
8
-
Bolt
-
3 Nm (27 in. lb)
-
2 parts