A8L Quattro Sedan V8-4.2L (AUX) (2001)
Indicated on display:
-
Press buttons -0- and -4- to select function 04 "Basic Setting"
Indicated on display:
-
Confirm input using the -Q-button.
Indicated on display:
-
Open vent screw at front left brake caliper.
-
Press buttons -0-, -0-, and -2-. Press -Q- button to confirm input.
Indicated on display:
Note:
The hydraulic pump for traction control -V166- is activated for ten (10) seconds.
Do not activate more than three times in a row (approximately 30 seconds). After this, a cooling time of at least 5 minutes is necessary.
To interrupt activation, press the (arrow) button. The program will return to the start screen.
Indicated on display:
-
Bleed until bubble and foam-free brake fluid escapes.
-
Close bleeder screw.
-
Press buttons -0- and -6- to select "End Output" function 06.
Indicated on display:
-
Confirm input using the -Q- button.
Indicated on display:
-
Switch ignition off.
-
Disconnect scan tool.
-
Switch off US1116 brake bleeder.
-
Check brake fluid level in expansion tank, correct if necessary.