A8L Quattro Sedan V8-4.2L (AUX) (2001)
-
Remove A-pillar trim bottom left -1-.
-
Remove left air channel below instrument cluster.
-
Check installation position of cable cam, and adjust if necessary.
If installation position is OK.
-
Adjust operating rod of cable cam as follows:
-
Disconnect operating rod -1- from accelerator pedal -2- -arrow-.
-
Turn threaded piece of operating rod to adjust.
-
Afterwards, reconnect operating rod carefully.
-
Check adjustment.
-
Install air channel, lower A-pillar trim and floor mat.
-
Install knee protection bar.