audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Without Power Adjusted Seats|Page 5286 > < Without Power Adjusted Seats|Page 5284
Page 3
background image

-

Press lock bracket on both sides of armrest in direction or arrow and remove armrest.

-

Pull center cushion upward at rear edge (arrow -1-).

-

Slide center cushion to the back (arrow -2- ) and remove.

-

Cut cable tie of connector.

-

Connect connectors together.

-

Install center cushion.

-

Switch ignition on.

-

Connect battery.

WARNING!
When connecting battery make sure no one is in the vehicle.

-

Remove label for disabled rear side airbags.

-

Code control module to enable rear side airbags:

-

Fill out registration card and send the card to responsible sales center or importer for registration

Applying label for deactivated rear side airbag

-

Place label for deactivated side airbag (left and right) to frame of rear doors (arrow).

Without Power Adjusted Seats|Page 5286 > < Without Power Adjusted Seats|Page 5284