audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Wheel Bearing Housing, Removing and Installing|Page 4705 > < Wheel Bearing Housing, Removing and Installing
Page 2
background image

^

Remove brake caliper (2nd bolt not visible).

Notes: 
^

Suspend brake caliper from bodywork with binding wire.

^

Never leave brake caliper hanging from brake hose.

^

Remove brake disc.

^

Remove splash plate -arrows- (3rd bolt not visible).

^

Insert spring tensioner VAG 1752/1 with spring holder VAG 1752/3 into coil spring.

WARNING!  To reduce the risk of accident, make sure coil spring is properly positioned in spring holder VAG 175213. 

^

Compress spring until it can be removed.

^

For plugged in ABS wheel-speed sensor: pull out ABS wheel speed sensor -6-.

^

For bolted ABS wheel-speed sensor: remove ABS wheel speed sensor.

^

Remove hex nut -1- and remove eccentric bolt.

Wheel Bearing Housing, Removing and Installing|Page 4705 > < Wheel Bearing Housing, Removing and Installing