A8L Quattro Sedan V8-4.2L (AUX) (2001)
2 - Blink code output
1) Operating modes 1 and 2 are displayed alternately
-
Press button -1- to select "Rapid data transfer" operating mode 1.
Indicated on display:
Rapid data transfer HELP
Insert address word XX
-
Press buttons -0- and -2- to insert "Transmission Electronics" address word 02.
Indicated on display:
Rapid data transfer Q
02 Transmission Electronics
-
Press -Q- button to confirm input.
Indicated or display (control module identification):
4D0927156K AG5 01L 4.2| 4V USA D23
Coding 00002 WSC 01268
TCM Identification:
The transmission control module identification is dependent on manufacture status (data status). A control module identification may appear which is
different than that in this example.
Example:
4D0927156K Part number
AG5 01L
Automatic transmission 5 speed 01L
4.2| 4V
Engine type: 4.2 liter 4 valve
US
Market: USA
D23
EPROM (data status)
Coding 00002 Code: USA
WSC 01268 Dealership code of VAG 1551 scan tool with which last coding was carried out
CAUTION: Part numbers are listed here for reference only. Always check with your Parts department for the latest information.
If "Control module does not answer" is indicated on display:
-
A list of the possible malfunction causes can be printed out by pressing the HELP button.
After eliminating possible malfunction causes:
-
Again press buttons -0- and -2- to insert "Transmission Electronics" address word 02.
If "Control module does not answer" is again indicated on display:
-
Check power supply by conducting electrical test step 1. See: Testing and Inspection
-
Check wiring connection to DLC.
-
Check DTC table for the following codes:
^
16987/P0603: Internal Contr.Module (KAM), Error
^
16989/P0605: Internal Contr.Module ROM Test error
-
Press -> button.
Indicated on display:
Rapid data transfer HELP
Insert address word XX
-
A list of the possible functions can be printed out by pressing the HELP button.