A8L Quattro Sedan V8-4.2L (AUX) (2001)
Fluid Line/Hose: Service and Repair
ATF Lines, Oil Cooler, Cleaning
ATF Lines, Oil Cooler, Cleaning
Notes:
^
Comply with notes for removing and installing ATF lines go.
^
Before installing a replacement transmission, clean the oil cooler and lines using compressed air (max: 10 bar 145 psi).
CAUTION!
^
Always wear safety glasses.
^
Dispose of used ATF properly.
^ Remove bolts -1- and -4-.
^ Remove ATF lines -A- and -B- from transmission.
^ Install hose on end of line -B- and fasten with hose clamp. Put other end of hose in suitable container.
^ Blow compressed air (using air gun) through line -A- several times.
^ Install hose on line -A- and repeat procedure.
^ Reinstall oil lines.