A8L Quattro Sedan V8-4.2L (AUX) (2001)
-
Pull out floor mat -4- under trim B-pillar and flip up.
-
Raise up air duct -5-.
-
Remove connector -6-.
-
Unscrew 2 bolts -7- and remove sensor for lateral acceleration -8-.
Installing
Installation is done in reverse sequence, noting the following:
-
Note installed position of sensor for lateral acceleration -8-.
-
Arrow points outward.
2 - Nut - 3 Nm/27 in. lb (2 pieces)
7 - Bolt - 4.5 Nm/40 in. lb (2 pieces)
WARNING!
Note instructions when installing seat.