A8L Quattro Sedan V8-4.2L (AUX) (2001)
^
switch (up/downshift)
^
F189
^
Not applicable to USA/Canada
30 - Clip
^
For pin -36-
31 - Shear pen
^
For lever -32-
^
Drive in and out using suitable mandrel
32 - Lever for lock cable
33 - Ignition switch
34 - Bolt
^
With washer
^
For lock cable
35 - Ignition interlock cable
^
Must not be kinked
36 - Bolt
^
For lever -32-
37 - Clip
^
For selector lever cable on selector lever
38 - Selector lever cable, rear
^
Selector lever cable, disconnecting Fig. 5
39 - Clip
^
For selector lever cable on bracket
^
Installation position , item-E
40 - Selector lever cable, front
^
Disconnecting go to Fig. 5
41 - Mounting bracket
^
For selector lever cable
^
On transmission
42 - Bolt
^
Tighten to 23 Nm (17 ft. lbs.)
^
Qty: 2
^
For fastening mounting bracket -41- to transmission
43 - Guard plate
^
For shift lock solenoid -N110-
^
Loosen connection to bracket with screwdriver go to Fig. 3
44 - Bolt
^
Qty: 4
45 - Washer
46 - Mounting plate
^
Qty:2 (left and right)
47 - Bracket
^
Qty: 2 (left and right)
48 - Bolt
^
Tighten to 8 Nm (71 inch lbs.)
^
Qty:4
49 - Shift lock solenoid -N110-
^
Removing and installing Fig. 3
^
Testing function
^
Can be checked in Electrical testing, and "Read Measuring Value Block" function 08
Fig. 1 Wire routing on selector lever mechanism