A8L Quattro Sedan V8-4.2L (AUX) (2001)
Fig. 3 Tightening Clamp
Fig. 4 Pressing Off Outer CV Joint
-
Hold drive axle in vise with jaw covers.
-
Take off clamp, push back CV joint boot.
-
Thread M16 end of spindle 3207 into CV joint and turn spindle until CV joint is pressed off axle.
Fig. 5 Installation Positions Of Circlip, Spacer Ring And Dished Washer
1 - Circlip
2 - Spacer ring
3 - Dished washer