A8L Quattro Sedan V8-4.2L (AUX) (2001)
A Hex bolt M8 x 30
^
Pull out sealing ring.
Installing
The sealing ring is installed in reverse order of removal. In addition, the following work steps have to be carried out:
Note:
Refer to installation notes.
^
Replace O-ring between pinion bearing and flange (lubricate O-ring lightly before installation).
^
Lubricate outer circumference of sealing ring with gear oil.
^
Drive sealing ring for drive shaft flange in to stop using special tool 3026.
^
Lubricate space between sealing lip and dust lip with gear oil.
CAUTION!