A8L Quattro Sedan V8-4.2L (AUX) (2001)
-
Loosen mounting screws (arrows) for distributor housing diagonally.
CAUTION: Remove the distributor gear housing from the back of the transmission slowly and carefully. Otherwise, the Torsen differential could
fall out of the transmission.
-
Press Torsen differential (complete) to rear, off output pinion (to right, in line with straight arrow).
Installation
-
The distributor gear is installed in reverse order of removal. In addition, the following work steps have to be carried out.
-
Check for presence of dowel sleeves (arrow -A-) and (arrow -B-).
-
Place gasket.
NOTE: Put a thin coat of Vaseline on the sealing surface before installing the gasket to prevent it from slipping.
-
Slide cleaned magnets into cast holding pocket -1- in intermediate flange.