A8L Quattro Sedan V8-4.2L (BVJ) (2007)
‹› Mount and screen unit at top may be damaged. Only the screen (if functioning) is to be used again.
-
Remove screen by loosening both screws - arrows - (2 Nm).
-
Remove the wire from screen to Front Information Display Control Head Control Module (J523).
-
Disconnect harness connector to Open-Close Display Motor (V301).
-
To do so, remove driver's side storage tray.
-
Remove screen unit completely.
Installing
-
Install screen into a new screen unit.
-
Perform further installation in reverse order.