A8L Quattro Sedan V8-4.2L (BVJ) (2007)
CAUTION!
Make sure light does not reflect off the (VAS 6350/4).
Reflections affect the rear view camera (R189) and may make it impossible to perform the calibration.
-
Switch on the line laser (VAS 6350/3) - 1 - on the (VAS 6350/4) and then align the (VAS 6350/4) so that the laser beam from the (VAS 6350/3) is
pointed to the center of the Audi rings.
-
Make sure the Audi rings are centered on the rear. Adjust the laser beam as needed.
-
Switch Spacing Laser (VAS 6350/2) on with ON button.
The following display appears and the (VAS 6350/2) turns on.