A8L Quattro Sedan V8-4.2L (BVJ) (2007)
3
End plate for cover
‹› No replacement part available
4
Hex nut
‹› After cover - 2 - has been installed and secured, tighten hex nuts to 4 Nm.
Cover strip for rear bumper
1
Sheet-metal screw
‹› 2 Nm
2
Gasket for rear lid
3
Speed nut
‹› Slid onto cover strip left and right.
4
Cover strip
‹› Bumper cover removed.
‹› To remove, remove bolts - 3 - and bolts - 5 - and pull out cover strip under seal - 2 -.
5
Bolt
‹› Self-tapping