A8L Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-6452001.png)
Rear Bumper Cover / Fascia: Service and Repair
Rear Bumper Cover Mounting Strip
Rear Bumper
Rear Bumper Cover Mounting strip
‹› Note direction of rotation for worm gear!
‹› Unlock the right slider by turning it to the right and the left slider by turning it to the left.
‹› After bumper cover has been loosened far enough at bolting points, release slider via the worm gear using an Allen wrench of 6 mm.
‹› Several rotations are necessary to do this.
‹› Doing this slides the retaining strip - 4 - downward and releases the retaining bolts - 5 - in longitudinal holes (keyhole profile) of cover.
‹› Cover can now be removed downward.