A8L Quattro Sedan V8-4.2L (BVJ) (2007)
‹› When removing door handle, slider - 2 - is slid away, releasing lugs - 3 - and door handle can be removed from outside.
‹› Illustration shows door handle in unlocked position.
-
When disassembling door handle, insert spindle - 4 - through facing side of door into mount - arrow - using a Torx(R) screwdriver (T15).
-
Rotate spindle counterclockwise to stop until door handle lugs are released.
-
Pull off securing clip - 1 - when disassembling lock cylinder => [ Front Door Handle and Lock Cylinder ] See: Front Door Handle and Lock
Cylinder.
-
Pull door handle out of mount.
Engaging operating rod in door lock
-
When installing a new door lock, clip operating rod - 1 - into casing - 2 -.
-
Move slide - 3 - of casing - 2 - upward to engage operating rod.
-
Pull securing pin - 4 - out of door lock only after operating rod has been installed.