A8L Quattro Sedan V8-4.2L (BVJ) (2007)
Front Door Panel: Removal and Replacement
Front Door Trim
Front Door Trim
Front Door Trim
1 - Door trim
‹› Removing
-
Remove decorative panel - 3 - => [ Trim Molding ]. See: Trim Molding
-
Remove screw - 2 -.
-
Close the hinged pocket - 5 -.
-
Remove screw - 4 -.
-
Unclip door trim - 1 - starting from below at clips - 6 - (Qty. 8).
-
Disengage release for interior door mechanism => [ Disengaging release cable for interior door mechanism ]
-
Disconnect harness connector on window regulator control module => [ Connector on window regulator control module ].
‹› Installing
-
Make sure that all clips - 6 - on rear side of door trim are clipped in. Replace damaged clips => [ Door trim securing clip ].