A8L Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-6594001.png)
Hood Weatherstrip: Service and Repair
Hood Seal
Hood Seal
1 - Hood seal
‹› Install seal on both sides on seals - 3 - at left and right.
‹› Press seal onto flange from rear toward front.
2 - Plenum chamber seal
‹› Install seal on both sides on seals - 3 - at left and right.
‹› Press seal at both sides onto plenum chamber flange.
3 - Right/left hood seal
‹› Self-adhesive.
‹› Adhesion surface free of dust and grease.
‹› Remove protective paper before applying.
‹› Position release cable in passage - 5 -.
‹› Position seal on fender mounting bolt.
