A8L Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-6685003.png)
3 - Metal Screw
‹› 1.5 Nm
4 - Expanding Clips
‹› Press in clamping pins only approximately. 5mm and pull out expanding clip released by doing this.
‹› Before installing, slide back clamping pin.
‹› After installing, press in clamping pin flush.
5 - Nut
‹› 1.5 Nm
Rear Wheel Housing Liner
1 - Rear Wheel Housing Liner
‹› Rear wheel removed.
2 - Nut
‹› 1.5 Nm
3 - Metal Screw
‹› 1.5 Nm
