A8L Quattro Sedan V8-4.2L (BVJ) (2007)
-
Connect the electrical connectors to the left and right level control system sensors.
-
Install the left and right connecting links - 2 -. Refer to - item 15 - in => [ Mounting Bracket, Upper Control Arms and Air Spring Damper
Assembly Overview ] See: Steering and Suspension/Suspension/Suspension Control ( Automatic - Electronic )/Air Spring/Service and
Repair/Removal and Replacement/Front Suspension/Mounting Bracket, Upper Control Arms and Air Spring Damper Assembly Overview and -
item 18 - in => [ Subframe, Engine Carrier and Stabilizer Bar Assembly Overview ] See: Steering and Suspension/Suspension/Stabilizer
Bar/Service and Repair/Front Suspension/Subframe, Engine Carrier and Stabilizer Bar Assembly Overview.
-
Install the bolt - 3 - from air spring damper to the control arm. Refer to - item 19 - in => [ Mounting Bracket, Upper Control Arms and Air Spring
Damper Assembly Overview ] See: Steering and Suspension/Suspension/Suspension Control ( Automatic - Electronic )/Air Spring/Service and
Repair/Removal and Replacement/Front Suspension/Mounting Bracket, Upper Control Arms and Air Spring Damper Assembly Overview.
-
Connect the connecting piece - 1 - to the residual pressure valve - 2 -. Refer to - item 23 - in => [ Mounting Bracket, Upper Control Arms and Air
Spring Damper Assembly Overview ] See: Steering and Suspension/Suspension/Suspension Control ( Automatic - Electronic )/Air Spring/Service
and Repair/Removal and Replacement/Front Suspension/Mounting Bracket, Upper Control Arms and Air Spring Damper Assembly Overview.
-
Install the noise insulation.
-
Install the wheels and tighten.
-
Place the vehicle on its wheels. Refer to => [ Positioning Vehicle on the Hoist and on its Wheels ] See: Steering and
Suspension/Suspension/Service and Repair/Procedures/Positioning Vehicle on the Hoist and on its Wheels.
-
Perform a vehicle alignment. Refer to => [ Wheel Alignment ] See: Maintenance/Alignment/Service and Repair/Procedures/Wheel Alignment.
-
After the vehicle alignment, tighten the subframe bolts to the correct additional angle.
-
Readapt the control position. Refer to => [ Control Position, Programming ] See: Steering and Suspension/Suspension/Suspension Control (
Automatic - Electronic )/Description and Operation/Level Control System.